4 Ways to Leverage Trench-less Water Line Repair/Replacement

Leaky pipes and flooded floors are the most frustrating issues people may encounter. Getting rid of these issues becomes their topmost priorities. Most of them implement trench-less waterline repair or replacement technique as it is deemed the best way to limit water damage.

Different Ways to Leverage Trench-less

Unlike conventional methods that need extensive excavation and have a lengthy installation process, trench-less technique abide by one key notion – minimal digging.

There are ample ways to leverage trench-less process, depending on the damage happened to the pipe, and save both your home as well as money.

Pipe Bursting

The trench-less technique is most widely used for sewer or waterline repair/replacement. It generally involves using spear-shaped equipment named Bursting Head, which is connected to the opposite end of the replacement pipe and fed through the damaged pipe via cable. This whole process is called pipe bursting because the cone-shaped end smashes the existing pipes into smithereens from within while installing the new pipe in a single, seamless process.

Cured-in-placed pipe (CIPP)

CIPP is mainly used for reinforcing the pre-existing pipes. This technique involves relining the line with the help of a seamless, PVC-infused liner that fills in the existing cracks and holes. Prior to relining, most experts leverage a process called hydro-jetting to radically clean the pipe. Once the liner is laid, it is sealed using steam of high pressure. This method is mainly used for minor damages because the line needs to be strong and durable enough to endure the lining process.

Pipe Replacement

This type of trench-less waterline repair also uses CIPP technique. This pipe replacement process commences the moment experts introduce a small cable machine into the line being replaced. Also, there is a smaller pipe attached to the machine, which is sealed-in-place and works within the old pipe. This method is perfect for decayed or extremely old pipes that can’t withstand lining.

Inversion Lining

Inversion lining is another way of enhancing durability and fill in the holes of cracks in a pipe. In this method, the liner material is composed of a felt tube, which is placed in the pipe like above explained trench-less methods.

In a nutshell, trench-less waterline repair ways are far more than just repairing and replacing pipes as they can also be leveraged to avert future pipe damages. Besides, going trench-less is not only cost-effective but also highly preventative as well as safe.